Caliper: Rear 82-92 F Assembled Standard (NOTE>>>)
Fully assembled - Fully assembled - These are Complete Standard fitment rear assemblies... not just a housing or a cleaned out shell.... Freshly USA proffessionally rebuilt caliper assemblies ready to bolt on & bleed.
| Bolt Holes | 5 |
| Pattern | 4.75" |
| Outside Diameter ( in ) | 10.50 / |
| Outside Diameter ( mm ) | 267 |
| Height ( in ) | 2.41 |
| Height ( mm ) | 61 |
| Nominal Thickness ( in ) | 1.04 |
| Nominal Thickness ( mm ) | 26.42 |
| Discard Thickness ( in ) | 0.96 |
| Discard Thickness ( mm ) | 24.38 |
| Vented/Solid | Vented |
Supplied individually - order TWO for one car.. or check the box for individual sides. LHS is American Drivers Side.. BUT .. in the early and standard production.. BOTH CALIPERS ARE THE SAME.. just turned around and used on the opposing mounts.. .. SEE BELOW
(If you have PBR Performance rear calipers.. 1987 & on.. they look like the ones at the bottom of the page and are listed elsewhere in the Rear Brake Section)
ADD REAR PADS IF NEEDED.
These Standard Rear Caliper above are fully assembled (but you may need to reuse your existing counter weight - some come with or without it....!) known as "loaded calipers"...generally a better option then trying to rebuild at times.. or buying all parts separately then having the added labor, be it professional or private etc.
Includes: New piston, New piston, New slider boots, bush's & seals.
- Fitting these and your back on the road quickly & easily.. (Delivery included too - when paid by CC within Australia) These fit standard optioned 82-92 Camaro Firebird Trans Am.
-
THESE ARE PER SIDE. both are the same.. AND supplied outright...
-
ADD REAR PADS IF NEEDED.
BELOW.. the early performance rear calipers.
also tough to get now.. ALLOY Australian Made and US factory Fitted. NOT currently offered.
Couldn't load pickup availability
Fully assembled - Fully assembled - These are Complete Standard fitment rear assemblies... not just a housing or a cleaned out shell.... Freshly USA proffessionally rebuilt caliper assemblies ready to bolt on & bleed.
| Bolt Holes | 5 |
| Pattern | 4.75" |
| Outside Diameter ( in ) | 10.50 / |
| Outside Diameter ( mm ) | 267 |
| Height ( in ) | 2.41 |
| Height ( mm ) | 61 |
| Nominal Thickness ( in ) | 1.04 |
| Nominal Thickness ( mm ) | 26.42 |
| Discard Thickness ( in ) | 0.96 |
| Discard Thickness ( mm ) | 24.38 |
| Vented/Solid | Vented |
Supplied individually - order TWO for one car.. or check the box for individual sides. LHS is American Drivers Side.. BUT .. in the early and standard production.. BOTH CALIPERS ARE THE SAME.. just turned around and used on the opposing mounts.. .. SEE BELOW
(If you have PBR Performance rear calipers.. 1987 & on.. they look like the ones at the bottom of the page and are listed elsewhere in the Rear Brake Section)
ADD REAR PADS IF NEEDED.
These Standard Rear Caliper above are fully assembled (but you may need to reuse your existing counter weight - some come with or without it....!) known as "loaded calipers"...generally a better option then trying to rebuild at times.. or buying all parts separately then having the added labor, be it professional or private etc.
Includes: New piston, New piston, New slider boots, bush's & seals.
- Fitting these and your back on the road quickly & easily.. (Delivery included too - when paid by CC within Australia) These fit standard optioned 82-92 Camaro Firebird Trans Am.
-
THESE ARE PER SIDE. both are the same.. AND supplied outright...
-
ADD REAR PADS IF NEEDED.
BELOW.. the early performance rear calipers.
also tough to get now.. ALLOY Australian Made and US factory Fitted. NOT currently offered.
