Electric Window conversion Kit: 67 Camaro Firebird - (2) Door ONLY w/ E-cranks

1967 Camaro Hard-Top/Coupe or Convertible - Front Doors ONLY

Wanting front doors only and want to keep the door trim and original handles in place ??.. this is it.. no switch holes to cut out.. just fit the electric handle switch wire it up.. put the new power window regs in.. know what your doing.. don't stuff it up.. don't play "lets see what sparks" ..read the instructions or or online install video and you should be OK.  This Nu-Relics US Made kit is probably best regarded as the premium kit.. is so much as its the regulars with motors.

Kit includes

• Wiring 
• 2 front door electric regulators
• Boots for the two doors
• Good instructions
•  2 x  E-cranks 
• USA produced Nu-relics kit.

This kit will  work fine on both DELUXE or standard trim.

E-Cranks as shown mean you don't change the appearance of the existing door trims. as you slightly then tilting window winder becomes the switch on each window location.

You can order all four - but this kit is  JUST the front doors ONLY.

Plus a choice if using the E Handle.. you can opt for a master switch to either fit into the door trim or in reach of the driver etc.. so its not obvious.

Note: The ACI motors are reverse polarity motors and require reverse polarity switches.

See Technical Tips for additional information supplied and make sure whoever installs it is trade qualified electronically.