Fender: 70 Chevelle LH or RH (ea)
This is a brand new reproduction full front fender for the 1970 Chevelle, available for either the left or right side as required. Due to its one-year, one-model specificity and limited demand, immediate stock availability in Australia is unlikely. However, if urgently needed, availability can be confirmed; otherwise, expect a 2 to 4-week delivery timeframe.
Delivery additional Ex Wollongong NSW
SMALL PRINT From the US Distributors: Due to the nature of the material and production, the sheet metal products you receive may have scratches, dings, small dents and other minor imperfections which are considered normal. These imperfections will easily be corrected during the initial filling, priming and sanding of your repair or restoration. We do not consider dings, minor dents, scratches in the EDP primer or any other minor imperfection to be defective or damaged. ALL sheet metal panels will require some preparation and manipulation during the installation process for a show quality fit and finish. We recommend that all sheet metal panels should be test fit before any prep work or paint is applied. Minor modifications such as elongating mounting holes, adding shims, etc, are normal and may be necessary when you are installing the product.
Couldn't load pickup availability
This is a brand new reproduction full front fender for the 1970 Chevelle, available for either the left or right side as required. Due to its one-year, one-model specificity and limited demand, immediate stock availability in Australia is unlikely. However, if urgently needed, availability can be confirmed; otherwise, expect a 2 to 4-week delivery timeframe.
Delivery additional Ex Wollongong NSW
SMALL PRINT From the US Distributors: Due to the nature of the material and production, the sheet metal products you receive may have scratches, dings, small dents and other minor imperfections which are considered normal. These imperfections will easily be corrected during the initial filling, priming and sanding of your repair or restoration. We do not consider dings, minor dents, scratches in the EDP primer or any other minor imperfection to be defective or damaged. ALL sheet metal panels will require some preparation and manipulation during the installation process for a show quality fit and finish. We recommend that all sheet metal panels should be test fit before any prep work or paint is applied. Minor modifications such as elongating mounting holes, adding shims, etc, are normal and may be necessary when you are installing the product.
