A Disc Brake FRONT Kit: 58-64 Full Size- Standard

This is a good complete kit, comes with instructions for easier factory type assembly.    Why would you try an fit a HQ or some other "mongrel" bits of this and that type kit...

    You need to have at least 15" rims .... NOT 14".

   Booster, Master, PV, & Standard rotors included along with AS SHOWN parts.

    Note for those with a RH Drive 58-64 model...those with the booster being fitted for the first time or as a replacement MAY.. MAY.. need the booster bracket shown at the bottom of this page.# PW17990E, if you order it and do not use it, keep it in perfect order and return it for a refund to keep things simple & moving for you.

  This is a GM engineered correct for weight Disc kit... designed off the 1969 to mid 80's most successfully widely used GM front disc brake ever.

Consider if not done to freshen up the rear brake and change the rear hose for a new one, they restrict flow internally as life goes on. Do it ONCE PROPERLY..

If you have been in the trade a bit.. you will also recognise the valve that the rotors and pads are GM Replica's and are .. on going.. a commonly available part. Also good for rego authorities.

NOTE: If buying the kit.. be aware of and instruct  your installer.. that the USA style proportioning valve if different to most..you need to read the blurb down the bottom here.. or you or your installer will bugger the prop valve and claim its faulty etc.. seriously....!

Fits:

• El Camino, Impala, Belair, Parisienne, Laurentian

Includes:

• 11" Standard Rotors.
• Loaded Large GM Calipers - these are easy to maintain 69 & on GM caliper.. the most common USA GM   brake components used in the last 50 years.
• Caliper Brackets, Hoses with Banjo Bolts,
• Vacuum Hose with Intake Manifold Fittings,
• Bearings, Seals, Dust Caps, Spindle Nuts, Spindle Washers,
• all Hardware,
• Cast Iron Master Cylinder,
• Brass Proportioning Valve Kit
• .... and a 8" new Power Brake Booster OR whatever size you want like a 7"' 9" or 11"...???   We'll swap it and set it up .. No extra cost... OR.. If unsure ... Just keep the booster pack very clean and neat and we'll swap and work with you the way it should be to get the parts best suited.  

You need to have at least 15" rims .... NOT 14".

STOCKS ARE LIMITED...We have multiples of 9 different car kits in stock but if there is a run on them then it can be up to 3 weeks for restock supply. But normally in stock....for the  59-64 Full size.

If need be call up & we'll check todays stock   ... If worse comes to worse its a 21 day wait....or less..... plan ahead.

Delivery:  Truck freight only .. NO COD.. this is a very kit of normally three  heavy cartons. Costs for Australian / NZ delivery is additional ex from Wollongong & will be billed separately.. worry about that later, best to a manned address no POST, best to a commercial address if possible for safeguarding etc.