GM "A-body" 1964-72 Full front wheel brake upgrade to power disc brake.. as per facory....2 Wheel Kit with 9 inch factory booster and standard rotors. Fits GTO, LeMans, Tempest, also Chevelle & Nova.
This is a good complete kit, comes with instructions for easier factory type assembly.
- Standard factory Height.
- You need to have 15" rims at least.
- We can change booster sizes from factory 9" to 11" if you want (just ask)
If you have been in the trade a bit.. you will also recognise the valve that the rotors and pads are GM reproductions and are .. on going.. a commonly available part.
There is A LOT IN THIS KIT.
REMEMBER TO USE A "PVTOOL" as shown below....when bleeding this American GM set up or the Proportioning Valve will fail & you will claim its faulty... They're different to local Holden type ones. If you have a US GM Disc brake set up already.. get a " PVTool " search for it on the site.
Includes:
11" front disc Rotors (std)
Loaded Large GM Calipers,
Caliper Brackets,
Backing Plates,
Stock Height Spindles,
2 x front Brake Hoses
Hoses with Banjo Bolts,
Vacuum Hose with Intake Manifold Fittings,
Bearings, Seals, Dust Caps,
Spindle Nuts,
Spindle Washers and all Hardware.
Cast Iron Master Cylinder,
Brass Proportioning Valve Kit
.... and a 9 inch new Power Brake Booster.
STOCKS ARE LIMITED... . Normal Stock Kit -. Various reductions of components can be assembled ..ie no booster or MC etc, .. but in reality... the savings are minimal and all components are geared to work properly with each other.
Delivery: Additional Truck freight only .. NO COD.. this is a very heavy kit of normally three or four heavy cartons.
Costs for Australian delivery is $75 to $150 pro-rata from Wollongong.