Cart Contents (18)CheckoutMy AccountContact Us
 

A Disc brake kit: REAR 55-70 Full Size B body  [PW16461]

 

Available Options:

Year Model::

 Price:  $790.00

Reviews



A Disc brake kit: REAR 55-70 Full Size B body

You must use.. like the front .. 15 inch rims as a minimum.

 

      This is normally a stock kit item.. but  need to know exact year of vehicle used for (not on order or phone etc..)

This is the full rear kit for 1955-68 REAR DISC CONVERSION...to vehicles like Impala, Belair, Parisiennes.. Laurentians.. .. the full size range of the GM "B BODY".. so full size cars.

  • 11" GM Rotors Multi Pattern
  • Fits 5x4.75" w/ 7/16 Studs & 5x4.5" w/ 1/2 Studs 
  • Large GM Calipers w/ Self Adjusting E-Brake (1979 Cadillac El Dorado) 
  • D54 Pads Included
  • Caliper Brackets & Spacers
  • Bracket Hardware
  • Flex Hoses & Clips
  • Park Brake Cables suite the 55-64 full size included.

Tech Notes - READ

This kit will push your wheels out an additional .125” per side, longer wheel studs may be required after installation of this kit.

If you have been in the trade a bit.. you will also recognise the valve that the rotors and pads are GM Replica's and are .. on going.. a commonly available part. Also good for rego authorities.

*Note: The Park brake cables provided in the kit will fit 55 - 64 Full Size Chevrolet.  Any other application will require the customer to modify the included cables to work with their application. The intermediate cable, center pull and cable couplers may not be necessary on 58 – 64 cars.

  • Does not fit S-10 Chasis or truck frames
  • Maximum diameter of 6.11" to fit rotor hat.
  •  Rotor Center = 2 3/4" - Rotor Hat Section Inside Diameter = 6 3/16"  You will need to modify your axles if they will not fit inside the rotor 
    hat and you will need to modify the rotor if the center hole is too small for your axles. 
  • .050x45 Degree Chamfer
  • 2.786" max register axle
  • Does not Fit 14" Rims Must use 15" or larger
  • When installing rear disc brake kit a disc/disc proportioning valve with a 1-1/8" bore master cylinder will be needed.

The kit comes with the two rear brake cables for the 55-64 full size series.. to complete the linkage of the handbrake - for other bodies you need to make or adjust cables to suit the body your upgrading. Other then that its a bolt on job.. about as easy as it gets.. but do make sure your other hydraulics are up to speed for the need.. ie don't go sticking a bloody HK Holden master cylinder up front thinking they are all the same.. (nag nag ..nag.. i know..!)

You must use.. like the front .. 15 inch rims as a minimum.

Delivery is additional on this kit.. pro rata ex Wollongong $33 to $88 nation wide.. WA regional & NT additional

Stocks of this  kit can vary .. call  ahead of need if possible, but stock is normally now good 2017 - or order via the web and the charge will only go though when its going out our door as normal, not at the time of order. 

Shop By Manufacturer
Share Product
Share on Facebook Share on Twitter
Copyright © 2018 US GM Service Parts
Design & Hosting by Jade Web Design