Just for a general insight.... This really only concerns Bigger panels, bonnets, doors.. mainly external / dress…
STOP.. if interested...Call for latest pricing quote.... these are scarce and not an easy item to have moved…
- Manufacturer
- Goodmark Industries
SORRY... we are unable to legally import paints now.. with the Federal Governments Money Grab.. for Annual Licensing…
- Manufacturer
- OER
These oval metal plugs replace the damaged or missing plugs?in your Camaro floor pan & boot area.
There is also…
These ROUND RUBBER plugs replace the damaged or missing plugs in your Camaro floor pan & boot area.
There is also…
New specific rear spoiler gaskets for the GTO Coupe style rear spoiler on the 68 & 69…
These oval metal plugs replace the damaged or missing plugs in 50- 70's GM vehicles in cabin floor pan &…
New pair of correctly made door body vents.. located next to the door striker pin.
This quality part also has the…
Under the bottom of the rear seat FLOOR.. lurks these 4 welded on brackets . you would be wise to…
Rear License plate bracket that is the fold down type for lower flap mounted as shown.Used on many…
Welded to the underside of the boot floor are these two straps that hold up the fuel tank via…
1964-67 GM “A”-body Rear Frame Side Body Mount Bracket (welds to side of frame…
8 High Tensile bolts and 8 washers for the body mounting in 8 positions as found on most Coupes form…
This is the pair set of frame mounts for the 64-67 GTO, Lemans , Chevelle, Olds, Buick …
BEST KIT
8 Bolts 2 3/4 long ,12 thick washers
4 bolts 3 1/4 long with its Nuts
24 pc, set includes: 12 bolts for…
- Manufacturer
- Reproduction
Fuel tank brace set with the right fitting hardware for 64-67 GM A bodies.
SPECIAL ADVANCE ORDER ONLY.. 2 -…
Over on the outer sides. these drop offs connect to the horizontal floor edge and fold down to meet…
Ten position 10 position / 20 Piece kit as shown with the base hardware and sleeve as shown for:
…
Full Kit for under the 68-72 Chevelle, GTO, Skylark, Cutlass COUPE body.
This is a 12 location /…
- Manufacturer
- Reproduction
This is for a SINGLE rocker panel molding.
They have two holes.. one each end.. no others for any other…
Correctly pressed lower rear patch panels as shown.
Select either side or repeat for both.
LHS is US Drivers Side.
…
64-69 GTO - LeMans, Tempest /Chevelle Malibu/ Olds Cutlass…
Center section only for the 64-67 GTO, GS, Cutlass, as shown.
44 inches deep by 22 inches wide.
…
For the rust repair needs mainly on the 69 ONLY Pontiac GTO & LeMans
Lower REAR of the wheel…
Body Mount Kit 68-72 A Sedan rubbers & sleeves (24Pce)
FOR THE 4 door sedan series.
Fits 68-72…
Just the center brace for the 64-69 A body (all) as shown.
Fits:
…
Just the FRONT brace for the 64-69 A body coupe as shown, often knocked around in forward accidents and…
Displaying 1 to 30 (of 85 products)