As an additional guide.. this might help people over time.... DONT JUST BLAME A PART
Don't have…
Standard brake hose cooper washer for most brake hose and caliper banjo bolt applications.
Supplied each. …
This is for ONE front or rear brake hose to frame retainer.
Supplied in SINGLE units ie 1 hose clip..…
New Front wheel bearing seal for the 68-82 Corvette.
Two used per car.
Supplied individually.…
Handy 10 pack of brake bleeder outlets for cylinders and calipers.. and some older Master Cylinders.
5 different thread types and…
Boring part unless you loose one.. ..
Each GM bolt is the correct profile for the 1985- 2013 Corvette
FRONT only.
2 per caliper.…
- Manufacturer
- General Motors
Regular CORVETTE FRONT flexible brake hose with the correct fittings each end Fits all 1968-82 Vettes... .. simple as…
You will used 4 on each caliper if rebuilding it properly.. but available individually here.
Fits:
CHEVROLET
CAMARO
(1967 -…
- Manufacturer
- Wagner
Complete set of 4 front caliper piston boots and seals representing the front caliper service kit.
Two Kits…
These are the 4 pins & clip used on each 4 piston caliper for the special calipers used on:
67-8 Firebird
67-8…
Brand new Steel 3/6" SET of rear trailing arm brake pipes as shown..
ONE set per vehicle.. widely used.. and realisticaly…
This is the quality most owners need who are not street or competative racing.. semi-metalic compound for good braking.
…
This is more a restorers kit... or for safety... a careful owners service kit..
You get all four…
Front Wheel Bearing Kit for 69-82 Corvettes.
Outer bearing and cone (2)
Inner bearings and cones (2)
Wheel bearing seals (2)
Bearing brands may…
- Manufacturer
- Reproduction
Front disc rotor with the bolt holes to bolt to the front hub. Not all are like this so see…
Front single disc rotor for the Corvette.
Supplied as is shown... 5 hole for mounting with hubs with studs.
Freight additional.
Specs:
…
This is a new FRONT upgrade kit…
All 4 brake caliper/rotor dust shield set...
GM Approved Reproduction.
…
These are pair of performance drilled & slotted rotors now developed affordably for the Corvette..
This fits…
Stainless Steel Sleeved
For the 65-82 Corvette.. brand new front Calipers.
Choose LH or RH.
Normal Stock…
Brand new Kit of FOUR standard 67-82 Corvette disc rotors:
2 front
2 rear
Delivery is not included…
This is a full set of directional slotted Corvette front and rear disc rotors for the 68-82 factory replacement…
- Manufacturer
- Reproduction
FRONT PAIR SET - NEW
For the 65-82 Corvette.. brand new FRONT…
Displaying 1 to 23 (of 23 products)