Heres something you don't see everyday anymore.. springs for the lower radiator hose to help stiffen it up and help…
Huge general use.. only one 25 degree bend with 1.5 inch /37mm in both ends, made to be cut down…
Lower only for the BB Corvette in 1966-1968 as shown.
Specs:
Centerline Length (in)
18.9
Centerline Length (mm)
480
Contains Spring
No
Inside Diameter 1…
Upper Radiator Hose for the 69-76 Corvette - as shown for the 350 with or without a/c.
…
Upper hose for the Corvette.. from 76 to early 1979...
.. the key to…
Upper hose for late 79-82 Corvetes ran a different size on each end of the rad hose.. Early's ran…
Lower Small Block V8.... molded radiator hose SPECIFICALLY... ONLY...for the 76-82 Corvette.. correct for LHS.. should be no known issues…
For cars with factory AC or had ac.. this is the correct top radiator hose for the 1979 to 1987…
Thermostat housing with two sensor thread.. optionally used for various years.
Particuarly for carby NON Injected california emissions cars or cars…
Upper hose.. is exactly as shown.. for upper Corvette 69-73.
Check LENGTH
…
- Manufacturer
- Reproduction
Lower Specific radiator hose for 69 - 74 Auto Corvette Big Block without Alloy Heads. (1968's are NOT the same)…
- Manufacturer
- Reproduction
Displaying 1 to 11 (of 11 products)