This goes on the back of the pedal to keep it at the correct foot touch position.
Fits most all 1967-02…
- Manufacturer
- OER
Grommet and sleeve kit that installs where the accelerator rod fits into linkage.
…
SINGLE RESTORATION NEEDS REPLACEMENT BALL STUD
for the accellerator pedal that used the Twin push on plug accelerator pad. Best to use…
Glove Box Door Bump Stops.
The correct pair of rubbers for the job.
Sold as a pair.
Used from late 1930's to early…
New chrome head screw for fastening the mirror mount bracket to the swival post coming from the actual mirror…
- Manufacturer
- OER
Used on seat trim to strap trim edges tight. .known as hog rings..
50 pack as shown.…
Pivot pin as found on the back of the accelerator pedal. The Spring also wraps around this.
High quality general reproduction…
- Manufacturer
- OER
10 pack of chrome dome headed phillips slotted self tapping 50's- 70's screws.
#8 x 1 1/4"…
Pivot Pin Steering Column GM (1)
Used on GM vehicles for decades.
You need a pivot pin removal tool this .…
Used to hold the Speedo Cable to the shaft exitiing the speedo cluster .. holds it firm to the cluster.
No…
Corvette shifter auto slide seal for around the shifter lever shaft.…
This for the thick interior firewall pad..the wide bodied plastic lugs that help hold the pad in place.
Supplied in…
1963 - 91 GM wood wheel steering colunn horn contact and mount.
Used on: (Plus MANY MORE)
67-9 Camaro
63-75 Corvette
66-70 Impala…
- Manufacturer
- OER
Simple usefull 7 pce trim and clip removal tool kit for automotive use.…
Pair of seat pivot bolts for the specifically... 74-78 Corvette as shown.
Different to 70-73's and on.
TWO BOLTS.Two nuts.…
1966-77 GM Automatic Transmission Brake Pedal bracket swing arm mounting kit with bushes as shown.…
- Manufacturer
- Inline Tube
Pair of seat pivot bolts for the specifically... 7-73 Corvette as shown.
Different to 74's and on.
TWO BOLTS.Two nuts.…
Leather sewn black shifter boot with red stitching as shown.
Works with most all GM Shifter needs.…
Chrome shaft turn leave with black knob.
Importantly this is NOT for tilt columns.. and it has a ROUND hole for…
- Manufacturer
- OER
Cancelling cam as shown....light green colour ... for 69 & up GM WITHOUT tilt steering.
May fit other…
Turn lever.. chrome shaft..this a screw
Fits but not limited to:
68 - 70 Corvette, Nova, Impala, Camaro, Chevelle, El Camino
…
This is the full set if needing to replace all the pull knob parts.. the 4 shown.
You may find you…
- Manufacturer
- OER
Good simple look and connector as shown.. with the right colour for illumination orignal needs.
…
Twin push on plug accelerator pad
Fits but limited too:
58-64 Chev Belair, Impala
64-67 Nova Chevy II
58-64 Pontiac Laurentian/ Parisienne (Some)
59-64 El…
This is the three peice specific 1968 to 76 Corvette Shifter surround slide edge and park brake.. as shown.. Factory…
Correct Brake pedal pad & Trim surround for Many of the GM automatic from '69 on through to mid 80's.
This…
- Manufacturer
- Reproduction
Brand new assembled 63-67 Corvette Glovebox Liner As shown.…
Brand new assembled 68-76 Corvette Glovebox Liner As shown.…
Brand new assembled 77-79 Corvette Glovebox Liner As shown.…
1966-77 GM Manual Transmission Brake Pedal.. to Brake bracket swing arm mounting kit with bushes as shown.…
- Manufacturer
- Inline Tube
Displaying 1 to 30 (of 58 products)