These are SO easy to be damaged in transit.. Each one has to have a HD box built for…
- Manufacturer
- OER
These clips hold the actuator connecting pin in place.
Select 2 if doing both sides of the car.
…
For 1968-69 Rally Sport Camaro & 68-9 Impala & same era Corvette.
A quality recently retooled…
- Manufacturer
- Reproduction
Rally Sport. This complete vacuum hose kit is colour coded as original to retain your cars original appearance.
Choose for 1968…
- Manufacturer
- OER
This reservoir is manufactured to exact specifiations to ensure correct operation of your head light doors.…
- Manufacturer
- Reproduction
Allows the vacumn hoses to run through the firewall from the switch to the head light assemblies..…
- Manufacturer
- Reproduction
This is the 7" trim ring for the headlamp bulb to be secured to the headlamp bucket.
This is for…
This bucket is an original quality reproduction used for mounting your headlights.
This bucket then attaches to the Headlight…
- Manufacturer
- OER
This is the Standard headlamp housing for the 67 & 68 & 69 Camaro.. choose the year your working on…
- Manufacturer
- OER
The housings attach to the radiator support and hold the headlight components including the headlight beam in place.
This…
- Manufacturer
- OER
A cheap alternative to new fenders when converting to an RS grill is to fit this set of…
Rally Sport. Includes 3 bolts to bolt your control opening hinge to the control backing plate.
One set…
Headlamp surrounds for the Rally Sport 67 & 68 grille. These clip onto the edge of the fender upper and…
- Manufacturer
- OER
Rally Sport. The correct 8" bolt designed to do the job right.
for the 67-9 Camaro RS Series.
Select 2 if…
Rally Sport headlamp molding.
This quality reproduction part is manufactured to fit exactly as the original item.
Choose LH or RH…
For the 67-68 - 1st Gen Camaro RS series... a quality reproduction of the original item.
Suits left or right hand…
New 1968 Camaro Headlamp door covers come as all black with the chrome horizontal lines in chrome... if…
- Manufacturer
- Reproduction
Rally Sport. These bumpers stoppers will replace your worn out originals with ease.
They stop the headlamp doors slamming upon closing…
Rally Sport Backing plates for headlamps..
1967-8 are different then 69's so know your year need & not on…
The 1967 or 68 or 69 Camaro Rally Sport Hide-away headlamp door assemblies are all different to…
- Manufacturer
- Reproduction
1967-68 Camaro Head Light Bezel 6 pack Mounting Nuts.
These barrel shaped nuts are used to mount the trim ring securly…
RS Headlamps on the 68 Camaro used this saft and lever bracket for their operation.
Supplied as a matched even pair.…
- Manufacturer
- Reproduction
Used on most all 1st gen F & many 70-82 2nd gens..
Four required per car for a complete set and…
- Manufacturer
- General Motors
All Models.
4 needed per car normally for full replacement.
Supplied as a KIT of 4.
…
- Manufacturer
- General Motors
For the Camaro and various other GM vehicles.
67-71 Camaro.
4 needed per car.…
1968 & 69 Rally Sport models used these.
Sold as a pair only.
These shields protects your actuators from road debris swept…
- Manufacturer
- Reproduction
Rally Sport. The smaller of the 2 actuator support brackets. Select 2 if ordering both sides.…
This set is used to fasten the head light actuator to the actuator bracket.
2 sets are required if doing both…
A reproduction of the larger actuator support bracket for the 68 or 69 Camaro RS.
Produced in original gauge…
An good reproduction canister for 68 & 69 Models that is a necessary component for your headlamp opening operation…
- Manufacturer
- OER
Displaying 1 to 30 (of 46 products)