Delivery is $36 +gst Nationally.. on top of the price of spoiler due to constant damage to these…
- Manufacturer
- OER
These clips hold the actuator connecting pin in place.
Select 2 if doing both sides of the car.
…
For 1968-69 Rally Sport Camaro & 68-9 Impala & same era Corvette.
A quality recently retooled…
- Manufacturer
- Reproduction
Rally Sport. This complete vacuum hose kit is colour coded as original to retain your cars original appearance.
Choose for 1968…
- Manufacturer
- OER
This reservoir is manufactured to exact specifiations to ensure correct operation of your head light doors.…
- Manufacturer
- Reproduction
Allows the vacumn hoses to run through the firewall from the switch to the head light assemblies..…
- Manufacturer
- Reproduction
This is the 7" trim ring for the headlamp bulb to be secured to the headlamp bucket.
This is for…
This bucket is an original quality reproduction used for mounting your headlights.
This bucket then attaches to the Headlight…
- Manufacturer
- OER
This is the Standard headlamp housing for the 67 & 68 & 69 Camaro.. choose the year your working on…
- Manufacturer
- OER
The housings attach to the radiator support and hold the headlight components including the headlight beam in place.
This…
- Manufacturer
- OER
A cheap alternative to new fenders when converting to an RS grill is to fit this set of…
Rally Sport. Includes 3 bolts to bolt your control opening hinge to the control backing plate.
One set…
Rally Sport. The correct 8" bolt designed to do the job right.
for the 67-9 Camaro RS Series.
Select 2 if…
Headlamp INNER Door - RS - Choose either side or both for the 69 Camaro RS with fold away headlamps.
LHS is…
For the 67-68 - 1st Gen Camaro RS series... a quality reproduction of the original item.
Suits left or right hand…
Rally Sport. These bumpers stoppers will replace your worn out originals with ease.
They stop the headlamp doors slamming upon closing…
Headlamp door backing pivot plate - Fits EITHER SIDE..
Two per car needed.…
For the standard grill cars.. this is the surround for each side.. sold separately.. for the 69 Camaro Without.. hideaway…
1967-68 Camaro Head Light Bezel 6 pack Mounting Nuts.
These barrel shaped nuts are used to mount the trim ring securly…
Used on most all 1st gen F & many 70-82 2nd gens..
Four required per car for a complete set and…
- Manufacturer
- General Motors
All Models.
4 needed per car normally for full replacement.
Supplied as a KIT of 4.
…
- Manufacturer
- General Motors
1968 & 69 Rally Sport models used these.
Sold as a pair only.
These shields protects your actuators from road debris swept…
- Manufacturer
- Reproduction
Rally Sport. The smaller of the 2 actuator support brackets. Select 2 if ordering both sides.…
This set is used to fasten the head light actuator to the actuator bracket.
2 sets are required if doing both…
A reproduction of the larger actuator support bracket for the 68 or 69 Camaro RS.
Produced in original gauge…
An good reproduction canister for 68 & 69 Models that is a necessary component for your headlamp opening operation…
- Manufacturer
- OER
1969 Rally Sports.
Supplied Each.
The bell crank installs from the head light actuator motor to the head light housing…
- Manufacturer
- Reproduction
1969 Head Light Bell Crank Shaft/Lever Support Bracket.
Used to support the shaft and lever assembly on your headlight housings.…
The correct spring for the job for both sides on most US GM vehicles.
Choose the quanity you require.
…
New reproduction Standard 69 Camaro Grill in SILVER, comes with the silver trim.
Delivery IS NOT included in this item as its…
Displaying 1 to 30 (of 40 products)