After 20 years the original style body side mouldings for the GM F body have returned.
…
- Manufacturer
- PWD
This is the accessory door edge vertical mould for the rear side edge on the 70 - 81 Firebird TA…
- Manufacturer
- Reproduction
NOTE: These are available order ahead if you wish.
... also see PW230101G if you want the VERTICAl molds also.
For all…
This is the vertical molding up behind your head LH or RH sides.
It attaches UNDER the roof rail weatherseal track.
Supplied…
Small 5cm / 2inch chrome mold that continued the rear of bonnet molding around the door molding on the…
This is the full 4 piece REAR molding kit in BLACK finish for the
1975-81 Firebird TA & Camaro.
Fit is…
This is the full 4 piece rear molding kit in silver/ chrome, fits and is as per original at 1/3…
- Manufacturer
- Reproduction
This is the rear kit for the earlier shapped Chrome rear glass on the 70-74 F body as shown.…
Choose Black or Standard Chrome.
This is a full front molding kit that includes the Top Upper mold +..... the two…
- Manufacturer
- Reproduction
This is a NEW original GM mold.. RARE to locate globally.
Again expensive.. so we have at times when located…
- Manufacturer
- General Motors
These super long rocker molds are approx 3 inches (75mm) deep and span the rocker panel from each wheel…
These super long rocker molds are approx 7/8 (22 mm) deep and span…
Roof Rail edge drip molding Set 70-81 Camaro…
These sit at the lower front pillar on the cowl panel.. on all 1970-81 models and primarily control run-off water…
Displaying 1 to 14 (of 14 products)