An old pump or power steering box will have…
Easy enough job for many but you don't do it often unless your in the trade.
There are more then a…
Bracket Set: Power Steering BIG BLOCK CHEV V8 LHS LONG NECK PUMP.. Lower Billet with mounting hardware.
This is designed to fit…
Bracket Set: Power Steering SBC V8 LHS Lower Billet with mounting hardware.
This is designed to fit many castings.. comes with…
Small Block power steering adjuster bracket for the 65- 68 ChevySuited to Camaro, Impala & Caprice. Original…
This is for the 65-66 Full Size B body or Impala, El Camino.. for LHD only.
Image for illustration…
This is for the 67-68 Full Size B body or Impala Belair..
USA LH Drive only.. not for RHD... …
For the full size GM cars listed below that either still use the original LHD drag/Center Link..
this is perfectly for…
This is the basic simple Control valve seal kit for the:
Belair/Impala/Parisienne/Laurentian 1959- 64.
1965-82 Corvette …
Brand New USA made Idler arm for Chev Impala, Belair, Laurentian Parisienne.
Greasable also.... this is the two part arm.... but…
- Manufacturer
- Moog
Brand Idler arm for 61-64 RH or LH drive Chev Impala, Belair, Laurentian Parisienne.
Greasable also...
…
- Manufacturer
- AC DELCO
This is idler arm for the 65-66 Big car range built on the Chev chassis, as found in…
Specific idler arm for 67 & 70 Full Size Chevy Impala / Belair & Pontiac Parisienne Right…
- Manufacturer
- AC DELCO
Unique Idler arm for the 72-74 GM Mainly full size bodies.. but listed below.
Most RH Drive conversions still used the…
Locking nut for the pulley on power steering pumps with a nut fastener.
Most all GM use it.…
NUT & large spring washer for the pitman to manual or power steering boxes.
Fits LHD 67-72 Camaro Firebird as a…
Click on image to Enlarge it.
This is a new old stock Manual steering pitman arm.. the arm that attaches to…
Power Steering Boot & Strap
JUST the dust boot and the wrap over strap.
Mainly in Aust / NZ its for 55-64…
If your manual non power assisted - LHD Vehicles fitted with a Big Block or Small Block V8.. its begining…
This kit specifically made for changing over from manual to power steering .. while still using parts of the original…
This is a bueat kit of the 4 hoses for the restoration of the older power steering systems in the…
Set of return and Pressure power steering hoses for the 77-79 Camaro & El Camino with factory AC originally.
FOR LHD…
Some power steering hoses are male or female ended.. going into a female power steering box.. per most GM Saginal…
This is the main hoses with fitting as shown. for the restoration of the older power steering ram type systems…
This is the RETURN hose with the end for the Impala, Belair series V8 Small Block.The illustration …
This is the PRESSURE hose with the ends for the Impala, Belair series V8 Small Block.
The illustration shows BOTH return…
Hose same at both ends 90 degree Male & Female
THS IS A PRESSURE HOSE.
Note.. the male goes into your…
Power Steering Pressure hose for the full size Chevy in 69 - 70 In LHD form..
From Power Steering Pump
to LHD…
Power Steering cap and level for a huge range of GM PS pumps.. as early as 1963 up to…
New precise nut and washer for the 64-77 era GM power steering pump to keep the pulley on.…
- Manufacturer
- Inline Tube
Displaying 1 to 30 (of 50 products)