Bracket Set: Power Steering SBC V8 LHS Lower Billet with mounting hardware.
This is designed to fit many castings.. comes with…
This is the basic simple Control valve seal kit for the:
Belair/Impala/Parisienne/Laurentian 1959- 64.
1965-82 Corvette …
This is the steering column Heavy Duty Rubber disc that insulates the two halves of the lower intermediate steering shaft…
This is for original LHD steering coupling replacement. It is the assembly as shown GM.
**** Clamp down size…
Mounted captive in the base of the factory steering wheel.. this spring and plastic base retainer also has the small…
For the LHD Corvette .. OR.. RHD vettes using the OEM idler arm this is it. image is correct.…
Lower column rubber boot for many GM Columns from approx 1964 to 1981.
Held in by a spring clip.…
Locking nut for the pulley on power steering pumps with a nut fastener.
Most all GM use it.…
Pivot Pin Steering Column GM (1)
Used on GM vehicles for decades.
You need a pivot pin removal tool this .…
Power Steering Power Cylinder assembly as shown. Direct factory replacement, fit and forget.
BRAND NEW ONLY.. no more cheap…
- Manufacturer
- Remanufactured (USA)
Power Cylinder seal refurbishment kit for the 63-82 Corvette and many other 60-64 GM power steering cars..
…
Power Steering Boot & Strap
JUST the dust boot and the wrap over strap.
Mainly in Aust / NZ its for 55-64…
We will not supply these to people who don't get this part fitted proffessionally.. as its not straight forward. Dirt…
This is a full kit of 4 Power Steering hoses for the '68-79... .. as pictured is the 75-79…
This is a full kit of 4 Power Steering hoses for the 1980-82... .. as pictured is the 80-82…
Full brand new power steering hose, not to be confused with the Extending or retracting hose.
This is a…
This is the RETURN line... exactly as shown. Low Pressure hose. Can be trimmed to tighly fit whatever model..excess hose…
- Manufacturer
- Reproduction
Power Steering cap and level for a huge range of GM PS pumps.. as early as 1963 up to…
New precise nut and washer for the 64-77 era GM power steering pump to keep the pulley on.…
- Manufacturer
- Inline Tube
As new USA remanufactured power steering pump with resevior pr the 63-74 Corvette, complete ready to bolt on and…
As new USA remanufactured power steering pump with resevior pr the 75-79 Corvette, complete ready to bolt on and…
- Manufacturer
- Remanufactured (USA)
USA Remanufactured complete power steering pump the genuine replacement on 1980 & 81 Corvette.
No exchange needed.…
- Manufacturer
- Remanufactured (USA)
As new USA remanufactured Corvette power steering pump for the 1982 Corvette only.
No Exchange needed.
…
- Manufacturer
- Remanufactured (USA)
Power steering ram bushing set with inserts.
One set per car.
Your choice of colors.. ..
…
- Manufacturer
- Energy Suspension
Single belt AC pulley for the 68-72 era Pontiac GM vehicles.
mixed use.
7 3/8" x 3/8 offset (18mm)
center hole is…
US Remanufactured 16.1 ratio Steering box for the 69-82 model.
Note the housing is shorter then the other box type.
No Exchange…
To help with the constant requests for information on how to rebuild and proceedures involved and parts involved inside the…
This floating bearing presses into the lower tube of the steering column and the column tube runs through it.
For…
This SOLID Lower Support bearing presses into the lower tube of the…
Pin, spring and retainer for use with various 67-87 era all steering columns - inc 67-9 Firebird & Camaro (with…
Displaying 1 to 30 (of 37 products)