Pair set of headliner mounted coat hooks.. with screws.
Available in Henry Fords favorite Colour.
These are found on mid 60's to…
Simple trade style tool make tucking the head liner into the tight gap opening up the side particularly quite…
Set of 12 special clips that hold the rear headliner mounting clips in place.
…
The Headliner is retained on this metal strip set around the inner rear window.
INSIDE THE CAR.
Not to be…
This is the center top black joiner for the 67-69 Camaro or Firebird Rear interior plastic molding.
One per car.
Comes with…
Much brighter LED bulb for the INTERIOR replacement Bulb..Its twin pin as shown approx 40-42mm long baynet type shown.
Found on some license…
This is the interior lamp wiring that is tied into the headlining .. and punches into the interior lamp bezel…
This is the Courtesy Lamp kit for various GM vehicles not limited to 1967 Firebird & Camaro Deluxe trim..…
LED Interior bulbs just make sense.. much better illumination.. while lower heat..less lense destruction ongoing.
This is supplied as a pair..…
A proper conversion kit for the round interior light design found in most Camaro and Firebird and many big cars..
Fits…
LED interior light base .. GM interchange 1962-69 tear drop shape headliner mounted lamp.
perfect for 1st gen Camaro's and Firebirds.…
This is a raw uncovered set of the precut sail panels or "B Pillar" trim backing.. for the 67-9 Camaro…
Interior headliner SIDE rear panels.. LH & RHS.. these come covered.. with the new stiffener behind it..ready to fit.
A number…
Brand new rear parcel shelf speaker grill for the 60's GM Vehicles inc Camaro & Firebird.
Size is 6"…
This is a new pair of sunvisors for the 67-9 Camaro or Firebird.
Note if for Convertible or Coupe. Thise are…
10 pack of chrome dome headed phillips slotted self tapping 50's- 70's screws.
#8 x 1 1/4"…
This is the cardboard preformed rear of rear seat divider with the insulation padding attached.
Too big for post...delivery additional from…
Set of Clips for around the rear from rear side 1/4 to the other rear side 1/4 window, for the…
This is the roof cover material presewn, heat sealed Levant material design known to be used originally on the 67-9…
Due in stock early April 2023
This is for the inner roof.. will help heaps with…
- Manufacturer
- Flatline Barriers
This mold runs UP the door opening on the 1/4 panel, hides the actual weld seam line and ridges the…
- Manufacturer
- OER
Located in the rear inner corner section where the headliner and seat shelf meet.
Supplied in Pairs... (may have individual…
- Manufacturer
- OER
Inside the front edge of the head liner is this black plastic trim mould that holds the material in place…
- Manufacturer
- OER
Three piece black head liner trim edging... goes up each side and across the top of the rear inside of…
- Manufacturer
- OER
Along the outside edge of EACH side the head liner is retained into place by this pinch weld grabbing headlining…
- Manufacturer
- OER
1968-69 Inside Head liner Side Trim of Standard Trim models..extending from the windscreen pillar along the head liner and to…
- Manufacturer
- OER
These interior rear pillar mounted lamps were used on various 62-67 Chevy's including the 1967 Camaro. You'll find…
- Manufacturer
- OER
Chrome interior light lens base for various 60's GM vehicles.. where fitted with this design.
Camaro: 67-69
Firebird: 67-69
Chevelle: 64-69
Nova: 62-69
…
- Manufacturer
- OER
This is the set of Lens and Housing for the first gen Firebird & Camaro, early Chevelles and Nova's…
- Manufacturer
- OER
Brand New interior Light lens for 60's GM vehicles as shown.
Camaro: 67-69
Firebird: 67-69
Chevelle: 64-67
Nova: 62-69
This clips into the Chrome base…
- Manufacturer
- OER
Displaying 1 to 30 (of 47 products)