This is the lower front section of the rear 1/4 panel. Precision stamped panel ready for fitment.
Comes in any colour…
This is inside the boot area .. goes from the boot / trunk floor to the opening for where the…
This Rear of Rear patch is designed for easy installation with original wheel well lip shape.
The metal correctly shaped patch…
- Manufacturer
- Reproduction
These 67-69 Firebird or Camaro panels are often or have been often not been replaced in the past due to…
The trunk lid bolt set with washers for the majority of 50 's to about 1981 GM Vehicles using AF …
Located inside on each side of the boot floor to 1/4 panel.. its where the return of the rear bumper…
The ia a SINGLEunder trunk/boot floor re-inforcements were originally welded under the trunk floor to add support to the pressed…
- Manufacturer
- Reproduction
The 1969 only in PAIR SETS of trunk/boot floor re-inforcements were originally welded under the trunk floor to add support…
- Manufacturer
- Reproduction
Round boot lid bump stop .. used on heaps of 60's vehiceles ... including but not limited too..
67-9 Camaro &…
New production part just out.. used on all 67-69 Firebirds & Camaro's.. and certain other US GM cars of…
- Manufacturer
- Reproduction
This is what the roof gutter mold clips onto.. this is the metal gutter..
It is the…
Type Two of this panel.. better suited for many rust fixing applications.
This is a factory replicated sectional pressing for the…
This structural part is for serious replacement of the under car frame rail built into the rear of the…
- Manufacturer
- Reproduction
These are for 1967 Firebird & Camaro's... they are the full replacement rear frame rail.. as it would be if…
Fits 1967- 69 Models and this is a high quality same gauge steel reproduction of the original frame sections…
These are for 68-69 Firebird & Camaro's... they are the full replacement rear frame rail.. as it would be…
- Manufacturer
- Reproduction
This structural part is for serious replacement of the under car frame rail built into the rear of the…
- Manufacturer
- Reproduction
A quality reproduction tank manufactured to the exact original specifications.
BE AWARE of some real cheap junk in the…
NEW.... Brand new Stainless steel 67-68 Camaro or Firebird 1st gen fuel tank ready to fit.
Each is shiney…
A standard quality reproduction 1969 ONLY Camaro or Firebird fuel tank manufactured to the exact original specifications.
BE…
- Manufacturer
- Reproduction
NEW.... Brand new Stainless Steel 1st gen fuel tanks ready to fit.
Each is bright stainless and can be polished…
Brand new separate parts for the rebuild & or restoration of the first gen Firebird & Camaro hinge and…
Replace your worn out mechanism with this new reproduction latch mechanism.
As used on many many US GM Vehicles..including but not…
SUPPLIED EACH . .IE ONE.. order two if for both sides.
This under floor rust repair panel located between…
New Production specific rear license bracket for the 68-72 era A & F body listed below.
with a 5.5 inch mounting…
SORRY... we are unable to legally import paints now.. with the Federal Governments Money Grab.. for Annual Licensing…
- Manufacturer
- OER
These oval metal plugs replace the damaged or missing plugs?in your Camaro floor pan & boot area.
There is also…
These oval metal plugs replace the damaged or missing plugs in 50- 70's GM vehicles in cabin floor pan &…
These ROUND RUBBER plugs replace the damaged or missing plugs in your Camaro floor pan & boot area.
There is also…
This type of repair panel is a good replacement to use if you have multiple rust problems or a damage …
- Manufacturer
- Reproduction
Displaying 1 to 30 (of 83 products)