Remember.. Pontiac is different to a Chevy.. .. the main immediate thing is the Dissy rotates…
Small block Chevy 59-81 era V8 Exhaust gaskets.
…
- Manufacturer
- Felpro
These premium exhaust gaskets from Mr. Gasket are designed and constructed to improve the sealing of exhaust header…
This is for the 403 Olds as found in 1977-80 era Firebirds & Trans Am.
On pack does both exhaust…
- Manufacturer
- Felpro
This is a fibre gasket not metal.
Yes these are considerably better then normal exhaust gaskets for older cars…
- Manufacturer
- Mr Gasket
TIN gaskets
Always use a exhaust gasket compound or silastic…
- Manufacturer
- Felpro
This "D port" normal tin gasket kit fits Pontiac V8 from 1967-79.
This is for normal 99% of everybody with…
This is the self sealing special stepped seal for the various GM Pontiac and403 olds exhaust manifold collector pipe junction.
Size…
This is the self sealing special stepped seal for the Pontiac 400 & 301 Pontiac exhaust manifold collector pipe junction.
Designed…
Cheap simple 301 Chev/Pontiac head set as shown.
…
Head set only for the 80-85 Carby Chevy 350 V8 as shown.…
Intake for the 403 Olds as found on 77-79 Firebird TA.s..
Image is correct. Comes with a tube of…
This is a FULL OLDS 403 Gasket Kit.
These specific 1977-80 Olds 6.6 ltr 403 V8 full engine rebuilt gasket…
- Manufacturer
- Felpro
These specific Pontiac 301 carby 1980 & 81 full engine rebuilt gasket kit... Fel-Pro Kit & Sealed Power kits.
NOT for…
- Manufacturer
- Felpro
Full USA Felpr0 gasket it for the 301 4.9 Turbo Trans Am.
Picture for illustration purposes only, not the actual kit.
…
- Manufacturer
- Felpro
A quality US made FELPO HEAD SET.. not the sump or the waer pump gaskets. but the head gaskets ,…
- Manufacturer
- Felpro
Gasket kit for the late 60's to late 70's Pontiac engine with or without the EGR fitted or designed for..
This…
- Manufacturer
- Felpro
Full USA Dana- Victor engine gasket kit for the Pontiac V8 350-455 - 69-71.
Delivery is included when paid for…
- Manufacturer
- Victor Gaskets
This is the full gasket kit for all Pontiac 350 400 & 455 (non Super Duty) V8 engines from…
Oil filter HOUSING to block fitting on the numerous use of the Oldsmobile engines as seen below.
Often the OLDS was…
Paper gasket as per image for the Pontiac Blocks below.
…
New water neck gasket fitting all the 389, 326, 350, 500, 428, 455 etc..
Not for some tripower and not for…
Single water pump gasket for the 1969-81 era PONTIAC V8.. not chev... this is the 11 bolt.. normal use…
See the picture and count the holes on your diffs inspection cover... both on yours and on…
See the picture and count the holes on your diffs inspection cover... both on yours and on…
- Manufacturer
- General Motors
Check the correct picture here.. this is the GM 10 bolt..
This is listed as fitting various diffs from 77…
12 bolt diff center inspection cover for various GM late 60's & early 70-'s GM Vehicles.
Check visual to…
US made "Detroit Gasket" engine head set for the 305 most common V8 used in 1975 to 1980 GM.
Image…
This is the full kit for the upper half of the 403. Illustration is correct.…
- Manufacturer
- Felpro
This is the LOWER end kit for those only pulling the sump off the 403 Olds V8, contains the fuel…
Displaying 1 to 30 (of 71 products)