64-67 GM A body AUTOMATIC Steering column interior PLATE that covers the seal and holds the…
Seals the flange plate at the interior of the steering column where it attaches to the firewall and helps prevent…
- Manufacturer
- Inline Tube
Steering column indicator for the Standard Non SS Chevelle & El Camino / Malibu…
New Chrome and black knob finished brand new reproduction blinker arm as shown.. for screw ON blinder levers.
Used in heaps…
- Manufacturer
- OER
Exact reproduction of the chrome shaft turn signal lever wth the correct thin black plastic knob as shown. Fastens…
Wiring and spring assembled.. probably not hard to make but its available if needed.
SOME models used a shorter carbon spring…
This is the early specific cancelling cam in the top of the steering column for the 64-66 GTO / LeMans…
This is the early specific canceling cam in the top of the steering column for the 64-66 GTO /…
This is the underside smaller cover for the Chevelle/ Malibu/ El Camino.
1968 only .. as shown…
This is the underside smaller cover for the Chevelle/ Malibu/ El Camino.
1969 only .. as shown…
- Manufacturer
- TrimParts
This is the underside smaller cover for the Chevelle/ Malibu/ El Camino.
1970-72 models with round gauge dash...only .. as shown…
Horn button cap used with all 1963-70 Camaros, Impala, Chevelle, Corvette, El Camino with the optional wood or comfort grip…
- Manufacturer
- OER
This is plastic insulated brass centered old school horn contact is as shown.. long time needed resto part.
Used on MOST…
This adapter mounts directly to the top of the steering column and retains the factory wood wheel.
The…
- Manufacturer
- OER
59-60 Chev full Size POWERGLIDE
(LHD use)
Note this is on the top of the steering column.. the RHD cars ..…
This is the chrome pull knob on the hub of most all GM 67-70 steering colomns with hazard warning…
New Turn Signal lever with black knob as shown for the 67 Nova. Fits various 64-67 GM vehicles
…
Turn lever.. chrome shaft..this a screw
Fits but not limited to:
68 - 70 Corvette, Nova, Impala, Camaro, Chevelle, El Camino
…
New Correct reproduction tilt lever for the majority of GM needs. from 68 to 88.…
This is the steering column mounted Reverse and Neutral switch for the 67-8 GM column auto needs.
Suits Aussie built 67-9…
This is the steering column mounted Reverse and Neutral switch for the 68-72 series Chevelles / El Camino / GM column…
Fits various steering columns.
This is for NON TILT columns.. This is BLACK as per the image. BLACK - NOT…
Sector Gears can be different with different column and attributies..but this gear..located at the base f the column fitted ignition…
This is the clamp and seal on the inside of the Firewall.. on the 68-72 Chevelle
CHEVELLE1968-1972
EL CAMINO1968-1972…
This floating bearing presses into the lower tube of the steering column and the column tube runs through it.
For…
This SOLID Lower Support bearing presses into the lower tube of the…
Pin, spring and retainer for use with various 67-87 era all steering columns - inc 67-9 Firebird & Camaro (with…
For 1978-87 El Camino and GMC…
- Manufacturer
- PWD
This is a KIT assembly for upgrading or replacing the 4 spoke Chevy steering wheel as shown in the 71-79…
Displaying 1 to 30 (of 40 products)