Inside side trim mold that holds the headliner in place.
This one is for 1967 Coupes only.…
These clips are supplied in sets of 4, and have been tough to get for yonks...
Not cheap…
- Manufacturer
- Reproduction
Pair set of headliner mounted coat hooks.. with screws.
Available in Henry Fords favorite Colour.
These are found on mid 60's to…
A Cheaper variety for 1967 ONLY.... but does not contain the pillar caps. For the covering edge when…
- Manufacturer
- Reproduction
This mold runs UP the door opening on the 1/4 panel, hides the actual weld seam line and ridges the…
- Manufacturer
- OER
Simple trade style tool make tucking the head liner into the tight gap opening up the side particularly quite…
Located in the rear inner corner section where the headliner and seat shelf meet.
Supplied in Pairs... (may have individual used…
- Manufacturer
- OER
Set of 12 special clips that hold the rear headliner mounting clips in place.
…
The Headliner is retained on this metal strip set around the inner rear window.
INSIDE THE CAR.
Not to be…
Inside the front edge of the head liner is this black plastic trim mould that holds the material in place…
- Manufacturer
- OER
This is the center top black joiner for the 67-69 Camaro or Firebird Rear interior plastic molding.
One per car.
Comes with…
This is the full set of front, side and rear head liner moulding for the 1967 Camaro & Firebird.
…
- Manufacturer
- Reproduction
This is the full set of front, side and rear head liner moulding for the 1968 Camaro & Firebird.
…
- Manufacturer
- Reproduction
Three piece black head liner trim edging... goes up each side and across the top of the rear inside of…
- Manufacturer
- OER
Along the outside edge of EACH side the head liner is retained into place by this pinch weld grabbing headlining…
- Manufacturer
- OER
Along the outside edge of EACH side the head liner is retained into place by this pinch weld…
- Manufacturer
- OER
1968-69 Inside Head liner Side Trim of Standard Trim models..extending from the windscreen pillar along the head liner and to…
- Manufacturer
- OER
Choose the grain you want.
67 Impala tier Grain (67) Opt 1…
- Manufacturer
- Reproduction
General production headliner... The "Bedford Grain" material has no holes.... it's easily recognised by a focus instantly on the lines…
- Manufacturer
- Reproduction
Due in stock early April 2023
This is for the inner roof.. will help heaps with…
- Manufacturer
- Flatline Barriers
Chrome interior light lens base for various 60's GM vehicles.. where fitted with this design.
Camaro: 67-69
Firebird: 67-69
Chevelle: 64-69
Nova: 62-69
…
- Manufacturer
- OER
LED interior light base .. GM interchange 1962-69 tear drop shape headliner mounted lamp.
perfect for 1st gen Camaro's and Firebirds.…
This is the set of Lens and Housing for the first gen Firebird & Camaro, early Chevelles and Nova's…
- Manufacturer
- OER
Brand New interior Light lens for 60's GM vehicles as shown.
Camaro: 67-69
Firebird: 67-69
Chevelle: 64-67
Nova: 62-69
This clips into the Chrome base…
- Manufacturer
- OER
This is the interior lamp wiring that is tied into the headlining .. and punches into the interior lamp bezel…
This is the Courtesy Lamp kit for various GM vehicles not limited to 1967 Firebird & Camaro Deluxe trim..…
LED Interior bulbs just make sense.. much better illumination.. while lower heat..less lense destruction ongoing.
This is supplied as a pair..…
A proper conversion kit for the round interior light design found in most Camaro and Firebird and many big cars..
Fits…
This is the boot or cover if you like that overs over the interior mirror bracket .. and the cover…
- Manufacturer
- OER
This is the actual bracket that is attached to the roof header... the mirror is fitted to this bracket with…
- Manufacturer
- OER
Displaying 1 to 30 (of 47 products)