This is the lower front section of the rear 1/4 panel. Precision stamped panel ready for fitment.
Comes in any…
This Rear of Rear patch is designed for easy installation with original wheel well lip shape.
The metal correctly shaped …
- Manufacturer
- Reproduction
The lower rear section of each front mudguard / fender is reproduced here enabling easier cut & replace restoration…
- Manufacturer
- Reproduction
This patch is designed for easy installation with original wheel well lip shape the patch is approximately 27 cms by…
- Manufacturer
- Reproduction
These are for repairs needing more then the thin outer wall skins.. These lip over the top…
- Manufacturer
- Goodmark Industries
Its the upper exterior panel that needs that is the upper cowl panel. where the vents are.
This panel takes the…
- Manufacturer
- Reproduction
This is the very lower outer repair patch . supplied for the 69 Firebird or Camaro. It's noted as…
This is what the roof gutter mold clips onto.. this is the metal gutter..
It is the…
This is the FULL floor panel for the 67-69 Camaro & Firebird.
Is made specifically for the Coupe version but there…
These are the front floor sections that run between the flat of the floor pan to the vertical flat of…
- Manufacturer
- Reproduction
These bulky new parts are available as either a left or right hand unit and are an excellent alternative to…
- Manufacturer
- Reproduction
Each 1967-69 panel extends from the rear seat section to the firewall extension upward near the transmission tunnel.
Each…
- Manufacturer
- Reproduction
This panel is the ideal replacement part if only your rear floor sections under where you put your feet...…
- Manufacturer
- Reproduction
Type One of this panel.. has more going up the sides and the main guts of the floor needed.. with…
- Manufacturer
- Reproduction
Type Two of this panel.. better suited for many rust fixing applications.
This is a factory replicated sectional pressing for the…
Full Floor panel for the RHS of the 67-69 Firebird or Camaro. Normal Taiwanese pressings.. good for the…
These are for 68-69 Firebird & Camaro's... they are the full replacement rear frame rail.. as it would be…
- Manufacturer
- Reproduction
These are under the front seat floor pans and form the structural reinforcement to mount the seats runners.
LH is USA…
These are under the front seat floor pans and form the structural reinforcment to mount the seats runners.
LH is USA…
These oval metal plugs replace the damaged or missing plugs?in your Camaro floor pan & boot area.
There is also…
These are a special skin designed to help repair rusted or damaged wheel arches and the face area of a…
- Manufacturer
- Reproduction
This patch is designed for easy installation with original wheel well lip shape the patch is approximately 27 cms by…
- Manufacturer
- Reproduction
This shorter rear deck panel goes between the rear quarter panels, is used for repairing rusted deck area's…
- Manufacturer
- Reproduction
There is a couple of these now out on the market, this is the bit heavier one.. good sharp…
- Manufacturer
- Reproduction
This is the full CONVERTIBLE ONLY rear panel..
HINGED for the trunk lid.. includes mounts and tension…
- Manufacturer
- Reproduction
The most complete rear deck panel for rebuilding the:
67-9 Camaro or Firebird Coupe or Convertible.
Comes with the main hinges.. deck…
New Steel INNER rocker panels for the 67-9 F COUPE.
Choose the side you need.. all are as per factory fit...…
- Manufacturer
- Reproduction
New Steel INNER rocker panels for the 67-9 F CONVERTIBLE, these are much more expensive then a coupe.. but…
- Manufacturer
- Reproduction
This is the factory style pressing of the outer rocker panel for replacement use on either LH or RHS as…
- Manufacturer
- Reproduction
Front of floor under the pedal area on the 67-9 Camaro or Firebird.
LHS is USA Drivers Side.
Sold EACH
Delivery additional…
Displaying 1 to 30 (of 33 products)