This is the lower front section of the rear 1/4 panel. Precision stamped panel ready for fitment.
Comes in any…
This is inside the boot area .. goes from the boot / trunk floor to the opening for where the…
These 67-69 Firebird or Camaro panels are often or have been often not been replaced in the past due to…
The trunk lid bolt set with washers for the majority of 50 's to about 1981 GM Vehicles using AF …
Located inside on each side of the boot floor to 1/4 panel.. its where the return of the rear bumper…
The ia a SINGLEunder trunk/boot floor re-inforcements were originally welded under the trunk floor to add support to the pressed…
- Manufacturer
- Reproduction
The 1969 only in PAIR SETS of trunk/boot floor re-inforcements were originally welded under the trunk floor to add support…
- Manufacturer
- Reproduction
This is the outer bump stop that bolts to the body frame above the diff tubes on LH &…
- Manufacturer
- Reproduction
Bumper bolt, 1 inch regular US typical 60's - 70's chrome cap headed bolt as shown with the nut.
This is…
10 bumper bolts and nuts, each bolt is polished aluminum headed for excellent cosmetic match to the rear…
12 bumper bolts and nuts, each bolt is polished aluminum headed for excellent costmetic match to the rear bumper...…
New part - 67-8 Firebird only
5 peice kit including the bumper center rear support as shown.
Delivery is…
- Manufacturer
- OER
New production part just out.. used on all 67-69 Firebirds & Camaro's.. and certain other US GM cars of…
- Manufacturer
- Reproduction
Type One of this panel.. has more going up the sides and the main guts of the floor needed.. with…
- Manufacturer
- Reproduction
Type Two of this panel.. better suited for many rust fixing applications.
This is a factory replicated sectional pressing for the…
These are for 68-69 Firebird & Camaro's... they are the full replacement rear frame rail.. as it would be…
- Manufacturer
- Reproduction
This structural part is for serious replacement of the under car frame rail built into the rear of the…
- Manufacturer
- Reproduction
New Pontiac Firebird hinged Fuel door as shown for the 67 or 68 models.
Does NOT include finger lift indent as…
Correct Reproduction for the FIREBIRD only... of the fuel tank filler neck that sleeves into the center fuel tank…
- Manufacturer
- OER
A quality reproduction tank manufactured to the exact original specifications.
BE AWARE of some real cheap junk in the…
NEW.... Brand new Stainless steel 67-68 Camaro or Firebird 1st gen fuel tank ready to fit.
Each is shiney…
A standard quality reproduction 1969 ONLY Camaro or Firebird fuel tank manufactured to the exact original specifications.
BE…
- Manufacturer
- Reproduction
NEW.... Brand new Stainless Steel 1st gen fuel tanks ready to fit.
Each is bright stainless and can be polished…
This is the double hock rod used on the 1st gen Camaro & Firebird as shown.…
Brand new separate parts for the rebuild & or restoration of the first gen Firebird & Camaro hinge and…
SUPPLIED EACH . .IE ONE.. order two if for both sides.
This under floor rust repair panel located between…
New Production specific rear license bracket for the 68-72 era A & F body listed below.
with a 5.5 inch mounting…
These oval metal plugs replace the damaged or missing plugs in 50- 70's GM vehicles in cabin floor pan &…
These ROUND RUBBER plugs replace the damaged or missing plugs in your Camaro floor pan & boot area.
There is also…
These are a special skin designed to help repair rusted or damaged wheel arches and the face area of a…
- Manufacturer
- Reproduction
Displaying 1 to 30 (of 70 products)