To help with the repeated requests for illustrations of the 67-8 Firebird front parts construction here is one.
Hopefully…
Just for a general insight.... This really only concerns Bigger panels, bonnets, doors.. mainly external / dress…
These 67-69 Firebird or Camaro panels are often or have been often not been replaced in the past due to…
The ia a SINGLEunder trunk/boot floor re-inforcements were originally welded under the trunk floor to add support to the pressed…
- Manufacturer
- Reproduction
The 1969 only in PAIR SETS of trunk/boot floor re-inforcements were originally welded under the trunk floor to add support…
- Manufacturer
- Reproduction
This is a upgraded design of the previously fairly week replacement that was around.
It is designed to keep…
- Manufacturer
- Reproduction
This is the upper cowl panel for correctly only 1967 F body with Air Conditioning (factory AC).. may be…
- Manufacturer
- Reproduction
This is the latest good revised tooling cowl panel as shown for the 1969 F body.
It is pressed/made…
- Manufacturer
- Reproduction
These are the top out sections constructed.. they replace the section next to the hood hinge area... on the…
- Manufacturer
- Reproduction
This 68 ONLY panel replaces the difficult to duplicate and now unfortunately all too often in major restorations on…
- Manufacturer
- Reproduction
The assembly as shown for the slighter taller sectional 69 Camaro & Firebird assembly for the coupe.. useful for rusted…
The assembly as shown for the 67 Camaro & Firebird Coupe.. useful for rusted or accident damaged cars.
…
Some folk want to change 67 Camaro or Firebirds to 1968 or 69 doors.. // generally to get away from…
This is the very lower outer repair patch . supplied for the 69 Firebird or Camaro. It's noted as…
If you've had to replace a door or look for a real good used one that never had a…
- Manufacturer
- Reproduction
We have two brand new 67 Camaro or Firebird LHS.. USA Drivers Side.. door skins..damaged by the boofheads in the…
These are full well produced full stamped door skins.
Professional fitment & welding needed
Finished in black primer.
Road truck delivery…
This is what the roof gutter mold clips onto AT THE FRONT A PILLAR.. seen on the inside up under…
This is what the roof gutter mold clips onto.. this is the metal gutter..
It is the…
This is the complete section from the firewall upper weld line back down to the floor weld line, as…
- Manufacturer
- Reproduction
This is the FULL floor panel for the 67-69 Camaro & Firebird.
Is made specifically for the Coupe version but there…
Each 1967-69 panel extends from the rear seat section to the firewall extension upward near the transmission tunnel.
Each…
- Manufacturer
- Reproduction
Type One of this panel.. has more going up the sides and the main guts of the floor needed.. with…
- Manufacturer
- Reproduction
Full Floor panel for the RHS of the 67-69 Firebird or Camaro. Normal Taiwanese pressings.. good for the…
Full front and rear floor panel with the…
Brand New full 6 piece clip on molding brightwork kit for the 67-9 Camaro & Firebird Coupe. New tooling..…
This is a exact copy of the long hood scoop pressing with a side flare of around 2…
These are ABSOLUTELY EXCELLENT 400 Firebird twin scoop hoods.
Purposely the latest tooling…
KIT DEAL...
Get a brand new Firebird 400 hood
Purposely the hood is the latest tooling only, a bit…
This high quality Brand NEW reproduction of the original door latch assembly is for the first gen…
Displaying 1 to 30 (of 43 products)