A quality reproduction tank manufactured to the exact original specifications.
BE AWARE of some real cheap junk in the…
NEW.... Brand new Stainless steel 67-68 Camaro or Firebird 1st gen fuel tank ready to fit.
Each is shiney…
NEW.... Brand new Stainless Steel 1st gen fuel tanks ready to fit.
Each is bright stainless and can be polished…
Fuel Filler neck rubber insulator used on most mid to late 60's and GM E & C bodies to around…
Brand new reproduction 5/16" / 7.9mm single pipe sender unit for the Camaro - comes with filter and seal.
This one…
SOLD OUT to a US owner.. 8/2023 .. no more GM ever..
This is NOT FOR ALL PONTIAC 400"s.. but…
- Manufacturer
- AC DELCO
Fine inline filter for carby use on vehicles listed below from genuine.
65-72 GTO / LeMans
Chevelle 66-74 With Chevy…
- Manufacturer
- AC DELCO
GM original pump with gasket for the various 67 model Pontiac's with or without a/c..
3 Pipes:
1 Vapor (Small…
- Manufacturer
- AC DELCO
Specific Pontiac fuel pump with gasket for the 1968 era cars with 350 & 400 V8 with 4…
- Manufacturer
- AC DELCO
New GM Fuel pump.. correct for the specification listed. Two pipe + one threaded outlet block.... the pipes are…
- Manufacturer
- AC DELCO
Pontiac only fuel pump with gasket.
2 Pipes:
1 pipe from tank to…
- Manufacturer
- AC DELCO
This strainer fits all 1961-81 models in the Sender.. as in most 67-9 Camaro & Firebird.
Fitment of different size pipes…
- Manufacturer
- AC DELCO
New Set of Custom Stainless Steel straps for either the original or the new stainless steel fuel tanks on…
- Manufacturer
- Custom Product
NO MORE GM left.. all gone.. old GM # ws 10147945.
Illustrated for your info only. Using the illustration…
- Manufacturer
- General Motors
Fuel line pipe clamp (11 mm o/d & for pipe of original 3/8th o/d) - GREEN…
- Manufacturer
- General Motors
Fuel line pipe clamp (15mm OD hose & typical 1/4 pipe) - RED…
- Manufacturer
- General Motors
1964-79 GM 4bbl V8 Carb Bolts 4pc
Sourced for use on but not limited too..
64-79 Firebird Camaro Trans Am 4 bbl
64-76 …
- Manufacturer
- Inline Tube
Precision reproduction of the one year only fuel tank bird emblem fitted to the 67 models.…
- Manufacturer
- OER
Precision reproduction of the one year only fuel tank bird emblem fitted...
....to the 68 Firebird…
- Manufacturer
- OER
Hard core PLASTIC sleeve bracket that attaches to the Firewall to guide the Linkage on the various vehicles listed below.
Bushs available…
- Manufacturer
- OER
This is a brand new complete Fuel Gauge and turn signal gauge assembly for cars NOT equipped with…
- Manufacturer
- OER
Correct Reproduction for the FIREBIRD only... of the fuel tank filler neck that sleeves into the center fuel tank…
- Manufacturer
- OER
This Rubber sleeve seals the fuel tank neck from corrosion as it passes through the boot area.
Double ended seal…
- Manufacturer
- OER
This four bolt mounted bracket is used on tth 67-68 Firebird to hold the Sleeve to the trunk floor.…
- Manufacturer
- OER
Strap bolts for fuel tank Two specific size bolts, nuts and washer set for remounting the fuel tank.…
- Manufacturer
- OER
Sender locking ring for all 61-70 GM Full size, 67-69 & 74-81 Camaro & Firebird - OER & GM…
- Manufacturer
- OER
Fuel Tanks can take different sender units.. but this is specifically for the 69 Firebird 4bbl with the two lines…
- Manufacturer
- OER
Sender Unit for 1967 Camaro & 67-68 Firebird using 3/8th / 9.5mm SINGLE line.
This will replace the…
- Manufacturer
- OER
The ia a SINGLEunder trunk/boot floor re-inforcements were originally welded under the trunk floor to add support to the pressed…
- Manufacturer
- Reproduction
The 1969 only in PAIR SETS of trunk/boot floor re-inforcements were originally welded under the trunk floor to add support…
- Manufacturer
- Reproduction
Displaying 31 to 60 (of 62 products)